Add Infomir MAG device

Requires at least one template. 

Our portal is not Middleware Stalker. We use our own scripts and methods. Original MAG devices and devices that use the portal directly work very well. Emulators are not supported.

It is recommended to first test the device before you buy.

It's an advantage to have the latest firmware installed on your device. Here are the instructions from the official website. LINK

The portal will be further developed. Currently the version 1.0 is online.
We have deliberately omitted modules such as weather, etc. The focal point is IPTV and EPG. The performance is amazingly good.

To be able to use our portal with the device, you need a normal line from your provider (username and password). We can not support M3U file at the moment. You can only make an MAG Line if your provider uses Xtream Codes Server software! If you already registered the device with the provider only with the MAC address, you also did not get a username and password. We have developed a Java tool, with which you can find out the user name and the password. We guarantee no success with it. Use only at your own risk.

See MAG Converter manual

If you have received a link from the provider that looks something like this  (http://server.extension:8080/get.php?username=123USER123&password=123PASS123&type=m3u_plus&output=ts) then you can create an API line. In this link you have all the information to create a line. I take as example this link.

Server = http://server.extension:8080
Username = 123USER123
Password = 123PASS123

1.Create a new MAG device

  • Click on the button "Add MAG device"  in the dashboard. You can now fill out this form with the information from the link.

    Title
    Title of your list

    Username
    Your username from the provider

    Password
    Your password from the provider

    Template
    Choose one of your templates. Please note that the credentials for this line are also from the same provider as the template

    Linetype
    Choose how long this line should be valid in the editor. Possible are 3.6 and 12 months

    Stream
    Choose whether you want to have MPEGTS (.ts) or HLS (.m3u8) stream. You can still change that later

    Parental code
    Select here the parental control code. In the customer interface you can also change the code.

    MAC
    Enter here the MAC address of the device. This field can no be edited. Format "00:1A:79:XX:XX:XX"

    Primary audio language
    Primary language for sound and subtitles.

    Secondary audio language
    Secondary language for sound and subtitles.

    Buffer size (ms)
    Choose a suitable buffer size in milliseconds here. By increasing the buffer size the stuttering can be remedied, but the channel change takes longer. You can adjust this value later.

  • Click on "Save". You get back to the dashboard. Your list will now sync to the server for the first time.

2. Prepare the MAG device

  • Go to the inner portal and then into the settings. Under Server-> Portal enter the following URL: http://mag.xtream-editor.com
  • The graphics resolution should be set to 1280x720 (Experimental 1920x1080)
  • Check the Time Zone and the time server NTP
  • Reboot your MAG device.

3. Subscribe the device

  • If you are satisfied with the portal, you can subscribe to it until the end of your regular subscription. The price is calculated. Click on the button "Subscribe"
    Please do not delete this device. The MAG subscription applies to exactly this record.

4. Edit MAG device

  • Click on the title of the MAG device

On this page you can change all data. You can remove the MAG device and then insert a new MAC address.

5. The Dashboard

1 = Change all selected lines to the stream type HLS (.m3u8).

2 = Change all selected lines to the stream type MPEGTS (.ts).

3 = Enable all selectes lines

4 = Disable all selected lines

5 = Delete line

6 = Move selected lines to other Template

7 = Send message to Portal. Your message will be displayed on the MAG device. 

8 = Send "Reload list" command. Reload the channel list and EPG.

9 = Send "Reload portal" command. The Xtream MAG Portal will be reloaded. Important for updates.

10 = Send "Reboot" command

11 = Switch state (Enable / Disable)

12 = Select all lines in this page

© Copyright 2016-2017 | Xtream Editor